icShield is a high-performance waterproof sealant. It’s a semi-solid, soft material (gel-based) made from a combination of a wide range of active ingredients to reduce the amount of toxins and skin irritation when using your fingers or brush to apply icShield to the areas of the surfaces. icShield seals the surface instantly and does not require a cure time before use. The substance is less sticky, tacky, and oily than conventional water sealant. icShield is easy to remove, clean, and safe for skin contact. icShield is odorless and colorless. icShield’s use in construction and industrial equipment provides a protective barrier against rust and corrosion by preventing moisture from reaching metal surfaces. It can also be used to seal small gaps to prevent water ingress, making it a valuable tool for maintaining equipment longevity.

 

Key advantages of using icShield in industrial settings:

Corrosion prevention: Its oily consistency creates a barrier on metal surfaces, blocking exposure to air and moisture, which can lead to rust.

Waterproofing: It can be applied to seals and gaskets to prevent water from entering critical components, especially electronic control boxes, and toolboxes exposed to moisture and water.

Protection against harsh environments: This can protect exposed metal parts from harsh weather conditions.

 

Important considerations when using icShield in industrial applications:

Application method: Apply a thin, even layer to ensure proper protection without excessive buildup.

Compatibility: Check that icShield is compatible with the materials of the equipment you are applying it to. The Primary function of icShield is to form a protective barrier on surfaces and extend the lifespan of machinery and equipment. icShield does not conduct electricity, so it can be a good insulator for protecting electrical components from moisture and corrosion.

Silicone sealants have several disadvantages:
High temperatures can cause the silicone sealant to soften and lose its shape, while freezing temperatures can make it hard and brittle.
Some silicone sealants may have poor mold resistance and can start to mold after a few months in humid environments.
Short shelf life – Silicone sealants can have a short shelf life, especially in hot and humid conditions.

icShield Creating Waterproof Surface:
icShield creates a waterproof surface that is very useful in leather, wood, stone, granite, and metal products. A thin layer of icShield can protect them from dirt and water. In addition, metal surfaces can be safe from corrosion and oxidation.

DIRECTIONS FOR USE: Please read the entire label before using it. Clean all surfaces and remove loose debris. Apply icShield to surfaces using a dry cloth, lint-free cloth, or disposable brush. icShield is a high-performance waterproofing sealant that seals instantly
in dry, damp, or wet conditions. icShield is a gel-based waterproofing sealant. icShield does not dry in the traditional sense; it forms a protective barrier on the surface to seal it from moisture and water. A small-scale test should be made on a surface before use.

SUITABLE SURFACES: Integrated Circuit Board, Electrical and Electronic Components (preferred low voltage). icShield is also useful on porous surfaces like wood, metal, granite, marble, stone, and leather. It is not recommended on walkway surfaces.

WARNINGS: This product is for external use only. Keep out of the Reach of Children and Pets. If swallowed, get medical help or contact a Poison Control Center immediately. Avoid contact with the eyes when using this product.

IMPORTANT: The user shall determine the product’s suitability for the intended application of the product of the intended application and assume all associated risks and liability—store at room temperature (73F/24C).

Safety Data Sheet (SDS)